Design of Reinforced Concrete Ninth Edition

Design of Reinforced Concrete Ninth Edition  

Contents

1 Introduction
2 Flexural Analysis of Beams
3 Strength Analysis of Beams According to ACI Code
4 Design of Rectangular Beams and One-Way Slabs
5 Analysis and Design of T Beams and Doubly Reinforced Beams
6 Serviceability
7 Bond, Development Lengths, and Splices
8 Shear and Diagonal Tension
9 Introduction to Columns
10 Design of Short Columns Subject to Axial Load and Bending
11 Slender Columns
12 Footings
13 Retaining Walls
14 Continuous Reinforced Concrete Structures
15 Torsion
16 Two-Way Slabs, Direct Design Method
17 Two-Way Slabs, Equivalent Frame Method
18 Walls
19 Prestressed Concrete
20 Reinforced Concrete Masonry



Concrete is a mixture of sand, gravel, crushed rock, or other aggregates held together in a
rocklike mass with a paste of cement and water. Sometimes one or more admixtures are added
to change certain characteristics of the concrete such as its workability, durability, and time of
hardening.
As with most rocklike substances, concrete has a high compressive strength and a very
low tensile strength. Reinforced concrete is a combination of concrete and steel wherein the
steel reinforcement provides the tensile strength lacking in the concrete. Steel reinforcing is also
capable of resisting compression forces and is used in columns as well as in other situations,
which are described later.

LINK

Share this

Related Posts

Previous
Next Post »