Analysis and Design of Steel Beams According to BS

Analysis and Design of Steel Beams According to BS


This spreadsheet performs an analysis and design of simply supported and cantilever, steel beams bending about their X-X axis and subjected to gravity loads. Beams can be either with full restraint or without full restraint.
Design is in accordance with BS 5950-1:1990. Bending moments, shear forces and deflections are computed at 1/60th positions along the span and the maximums of these values are used for the design. The equations for the analysis have been obtained from the Reinforced Concrete Designer's Handbook by Reynolds and Steedman. Self weight of the steel section is automatically included in the calculations. The moment capacity of the section is calculated taking into account the corresponding shear force and a reduction is made as necessary. A check is made to see if a shear bucking calculation is required and a warning is issued. This spreadsheet also contains a calculation sheet for checking local web bearing and buckling.
 
  






Download Analysis and Design of Steel Beams According to BS Sheet Free  

Link

Share this

Related Posts

Previous
Next Post »

2 comments

Write comments